- Product details
- Specifications
-
CHD601-ETC card reader is one of the high-end innovative products developed by our company. It has built-in 5.8G microwave processing unit, industrial high speed CPU and various external communication interfaces that can be quickly configured according to the needs of the use environment. It can connect with all kinds of OBU (on-board unit) that meet ITS standards. It can be used for payment flexibly and reliably. The basic communication configuration includes Weigen protocol, serial port protocol, Ethernet port protocol, 485 communication protocol, and supports mainstream controllers.
Main application areas: Suitable for various RSU (road side unit) usage scenarios including parking lot.
CHD601-ETC card reader for parking lot management system requirements, based on the special short range communication protocol (DSRC), combined with new electronic and wireless communication technology, developed to meet the national standard of road end communication equipment (RSU).
The antenna end is a microwave transceiver module, responsible for microwave signal reception/transmission, modulation/demodulation, encoding/decoding, encryption/decryption, response to the host computer control instructions and the upload of transaction results. -
Overall size: 270mm(L)X185mm(W)X57mm(H) ±5%
Net weight: 1.4kg ±5%
Shell material: AL-Mg alloy aluminum plate (lower shell), new ABS plus polycarbon (upper shell)
Color: grey
Rated operating voltage: 12VDC
Input voltage range: 9VDC-15VDC
Working current: ≤300mA; Heating device ≤2.5A when opened
Minimum supply current: 500mA/12VDC input (without heating device)
Working environment: -35~75℃, relative humidity is 4~90%(no condensation and icing)
Storage environment: -40~85℃, relative humidity: 4 ~90%(no condensation and icing)
Protection level: IP65
Vibration test: conform to GB/T2423.13
5.8G microwave: according to GB/T20851-2007
Carrier frequency: Channel 1: downlink 5.830GHz, uplink 5.790GHz
Channel 2: Downlink 5.840GHz, uplink 5.800GHz
Band width: ≦ 5MHz
Frequency tolerance: ±10ppm
Maximum equivalent omnidirectional radiant power /E.I.R.P: μ ≦+20dBm
Adjacent channel leakage power ratio /ACLR: μ-30dB
Service life: more than 350,000 times
Communication method: Wigan method
Communication distance: The Wigan connection distance is less than 30m
Resistance index: electrostatic discharge (ESD) : contact discharge ±6kV air discharge ±8kV
Electrical fast transient pulse group (EFT/B) : The peak voltage of the power supply port is ±2kV
I/O signal, data port voltage peak ±1kV
The pulse repetition rate is 5kHz
(SURGE) : power port wire-wire ±2kV wire-ground ±2kVThe data listed in this information is for reference only, specific product data to ship with product descriptions shall prevail, subject to change without notice
Copyright © Shenzhen Newabel Electronics Co., Ltd. 粤ICP备05093332号 SEO
powerby:300.cn